CANLY 25050

 

This product has been discontinued and replaced by the CANLY V2.0 module.

 

This page is for reference only.

Specifications

  • Bit rates up to 1Mbit/s
  • CAN controller: Microchip MCP25050 @ 16MHz clock
  • CAN transceiver: Philips PCA82C251, for 24V systems
  • Meets CAN specifications 2.0A (11 bit ID) and 2.0B (29 bit ID)
  • Standard 9-pin D-Sub connector for CAN bus, as per CiA DS102-1
  • 4 protected digital inputs, configurable for switch to GND, 12V or 24V voltage input
  • 4 digital open drain outputs, rated at 25V/0.6A
  • Expansion connector where all ports can be routed to an optional daughterboard with custom signal conditioning circuits
  • Voltage regulator with input protection, suitable for vehicle operation
  • 3 control LEDs.
  • Mechanical dimensions: 70 x 37mm
  • Benefits

    • Out-of-the-box CAN based I/O control
    • No microcontroller programming required
    • Industry-grade I/O configuration
    • Directly connect lamps, relays, sensors, switches, etc.
    • Configurable over the CAN bus with special CAN messages

    Related Documents

    Product Data Sheet

    Schematic Diagram

    MCP25050 Data Sheet

    Related Products

    CAN-SPI Adapter for Microcontrollers

     

    Default Programming

    See how the MCP25050 can be programmed with user-specific default parameters.

     

    Additional Resources

    Microchip product page

    Microchip MCP250XX Developer's Kit

     

     

    Home | Up | CANLY Programming | CANLY Datasheet

     

    Copyright 2003-2010 by Elektronik-Atelier, All Rights Reserved
    Webdesign by Elektronik-Atelier, 09.08.2010